Flow meter

Turbine flow meter response time is typical 3-4mS.

Electromagnetic flowmeters usually have a different power supply. The most common type has a battery power supply, 24V DC and 220V AC. Other options such as 85-265V AC, 11-40V DC.

The turbine flow meters are widely used in liquid and gas measurement. Here is the detailed catalog of the products. https://www2.slideshare.net/MichaelSun5/gas-turbine-flow-meter-240405526 https://www2.slideshare.net/MichaelSun5/liquid-turbine-flow-meter-240405623 https://www2.slideshare.net/MichaelSun5/sanitary-tri-clamp-turbine-flow-meter-installation-240405696

Usually, the magnetic flow meter output signal has 4-20mA, 0-10V, RS232, and RS485 as options.

A magnetic flow meter requires a minimum conductivity of 5 µS/cm. Magnetic flow meters will typically not work with hydrocarbons, distilled water, non-aqueous solutions, and non-conductive solutions.

It can’t be used to measure gas, steam, and liquids containing a lot of gas. It can’t be used to measure liquid media with very low conductivity, such as petroleum products or organic solvents. Ordinary industrial electromagnetic flowmeters cannot be used to measure high-temperature media due to the limitation of the measuring tube lining material

Magnetic Flowmeter tailor-make for customer application. Accuracy +/- 0.5% Flow Rate 100 m3/Hr Pressure 10 Kg/Cm2 Service Liquid – Water Temp – Ambient Line Size – Suitable As Per Flow Rate 9 Existing Line Size Is 4” Application: Transfer From Tank To Tank End Connection: Fanged As Per # 150 Qty: 02 Nos.

After the nominal diameter of the vortex flowmeter is selected, the large pressure loss of the vortex flowmeter should be calculated based on the diameter of the large flow meter and the fluid density under working conditions. For gas and steam, the large pressure loss should be lower than the pressure loss value proposed by

The temperature and pressure compensation vortex flowmeter is mainly used for the flow measurement of industrial pipeline medium fluid. Such as gas, liquid, vapor, and other media. It has small pressure loss, large measuring range-ability, and high accuracy. It is hardly affected by fluid density, pressure, temperature, viscosity, and other parameters when measuring volume flow

The output signal of the vortex flowmeter: a) Current signal: 4-20mA current value represents the instantaneous flow. b) Pulse output: square wave The output frequency of the pulse represents the instantaneous flow rate. c) Communication method: RS232/RS485/RS422 to transmit the current instantaneous flow of communication through the serial port.  On-site display: The on-site display is