admin_zero

Target Mode Flow meter consists of measure tube, pressure target, sensor part (include flow strength sensor, pressure sensor, and temperature sensor), transition part (variable types based on temperature, pressure), integration microcomputer (include an LCD display and output part). The the structure is shown below:

Electrical wiring for compact converter Electrical wiring for remote converter

Typical Application The intelligent electromagnetic flowmeter consists of two parts: sensor and converter. Based on Faraday’s law of magnetic induction, it’s a speed meter to measure the volume flow of conductive liquid. In addition, to measure the volume flow of general conductive liquids, it can also be used to measure the volume flow rate of

 Measurements are not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity. There is no obstruction component in the measuring tube, no pressure loss reduced the requirements of the straight pipeline. It has a unique adaptability to slurry measurement. It has good corrosion resistance and wears resistance when choosing reasonable electrodes and lining

Generally, the fluid measured by the electromagnetic flowmeter will contain some bubbles, and if these bubbles are relatively evenly distributed, they will not affect the measurement, but once the bubbles become larger, the output signal of the flowmeter will be a larger or smaller influence.   First of all, from the installation to meet the

The magnetic flowmeter price varies according to the difference of flange size, flange standard, body material, sensor lining, accuracy, output, electrode, etc. The EXW without VAT or the shipping charges will influence the price. It’s better for you to know the application and working environment. Contact the supplier to get the details’ quotation.

1. The working theory is different Electromagnetic flowmeter working theory The electromagnetic flowmeter is a flowmeter that performs flow measurements according to Faraday’s law of electromagnetic induction. The advantage of the electromagnetic flowmeter is that the pressure loss is extremely small and the measurable flow range is large. The ratio of the maximum flow rate

Installation on field Mounting position Pipes must be fully filled with liquids. It is essential that pipes remain fully filled at all times, otherwise, flow rate indications may be affected, and measurement errors may be caused. Avoid air bubbles. If air bubbles enter a measurement pipe, flow rate indications may be affected and measurement errors