admin_zero

In the mid-1970s, enterprises in China began to be applied in the industrial field and successfully solved many working fluid mass flow measurement and measurement management problems. Especially for the development of computer network technology, the turbine flowmeter has a great degree of breakthrough and progress in measuring the flow field. With the current rapid […]

The working principle of the turbine flowmeter : The fluid flows through the turbine housing causing an internal rotor to spin. As the rotor spins, an electrical signal is generated in the pickup coil. This signal is converted into engineering units (liters, cubic meters, gallons, etc.) on the local display where is applicable. Optional accessory

The turbine flowmeter cannot be used for bidirectional measurement, otherwise, it will affect its service life and measurement accuracy.

The turbine flow meters are widely used in liquid and gas measurement. The typical application has natural gas, diesel fuel, compressed air, water, sanitary measurement, pill coating, gas and oil, hydraulic oil, disposal wells, chemical injection, engine testing, shipboard reverse osmosis systems, monitor fuel supply to ship engines, custody transfer, building automation HVAC, and water

Turbine flow meters come with their own set of advantages and disadvantages. Some of the advantages of turbine flow meters include: Suitable for gases and liquids. Highly accurate and precise, turbine flow meters are ±0.5% accurate normally. However, it is possible to achieve an accuracy of ±0.25%. Economical to purchase so it is one of the

Turbine flow meters are used for both liquid and gas measurement and they are high accuracy ±0.5% and repeatability of ±0.1% or ±0.05%. The turndown ratio is 10:1 or 30:1 or bigger.

How to Select a Magnetic Flow Meter? Well, when choosing a magnetic flow meter, you should consider some factors to ensure that you get one that suits your needs. Besides, getting the wrong one will not only mean less efficiency but also trouble. Luckily, there are many types of flow meters in the market and

Under the condition that the range Q has been determined, the size of the flowmeter diameter D can be determined according to the range of the above-mentioned flow rate V, and its value is calculated by the following formula: Q=πD2V/4 Q: Flow rate (m3/hr) D: Pipe inner diameter V: Flow velocity (m/h) The range Q

Turbine flow meter response time is typical 3-4mS.

Electromagnetic flowmeters usually have a different power supply. The most common type has a battery power supply, 24V DC and 220V AC. Other options such as 85-265V AC, 11-40V DC.