admin_zero

The electromagnetic flow meter flow rate unit could set to the following states. L/h,     L/m,     L/s, m3/h,   m3/m,   m3/s, t/h,    t/m,    t/s,    kg/h, kg/m,    kg/s

For the measurement accuracy requirements of the meter, consider whether the medium flow meets the flow range requirements of the flowmeter, whether the installation site meets the field installation requirements, and also consider what conditions and factors will affect the measurement of the flowmeter. To summarize 1. Pay attention to flowmeter selection. 2. Choose good

1. Use only fluids that are compatible with the housing material and wetted components of your Electromagnetic Flow Meter. 2. When handling hazardous liquids, always exercise appropriate safety precautions. 3. When measuring flammable liquids, observe precautions against fire or explosion. 4. When working in hazardous environments, always exercise appropriate safety precautions. 5. Handle the sensor

Steam and flow rate is 500kg/h, pressure 8 bar, 180-celsius degree, local indicator Flange DN65, C Type: Local Display; 24V DC Power; 4‐20mA Output; Max flow 500kg/h, Temp. 180-celsius degree, Pressure 8 bar,

Digital Mass Flow Meter DMFM S.No. Parameter Specification 1 Principle of Operation Thermal mass flow meter 2 Measured Parameter Mass Flow-rate 3 Engineering Units SCCM 4 Process Gases Argon, helium, and Air (The same DMFM should be able to measure argon, Helium & airflow rate) 5 Ambient conditions 20°C – 40°C and up to 80%

Type: ULTRASONIC FLOW METER (Clamp-on) Sensor: Sensor Process Water Nominal Diameter: 2” Pipe Material SS Flow 0-100 m3/hr. Pressure 10 bar max Temperature: Standard; max 120Deg C/248Deg F Design: Separate with field-mounted convertor (M16x1.5 CM) Signal 4-20 mA HART Rail; Cover Material SS 316 L; without cover Cable Length: 10 meters (Sensor to convertor) Calibration:

One of the Fuel Flowmeter (Heavy Duty) – 1 unit for our Philippines customers. Medium: Bunker Fuel Temp: 130 deg max Process Connection: 2” Flange Pressure: 25 bar (gauge) GPM: 9 gpm or 2.45 m3/h (UK) or 2.04 m3/h (US) Viscosity: 2432 Density: 0.9607 LCD Display Stand Alone or battery-operated (No power supply needed) Must

DN50 electromagnetic flowmeter (split type) , 24V power supply, field display, 4-20mA output, polytetrafluoroethylene lining, 316L electrode, National Standard Flange connection, carbon steel body, pressure 1.6 MPA, temperature-30 ~ 120 °C, Protection Grade IP65, measuring range 3.5-35m / h, with a 10-meter line This kind of electromagnetic flowmeter has a lot of wide range use.